Quickstart
From card in hand to card cleared in a few minutes. Intake for Mac.
1Put the card in
The card appears under Memory cards on Intake's start screen, with a count of its photos and videos and its size.
- Have Intake open by itself next time: tick Open Intake when this card is inserted on the card. It's the same per-card setting Photos uses, and the label tells you if it's replacing Photos.
- First time with a card: click Allow Access…, then Allow. You're asked once per card; formatting a card in camera makes it a new card, so you'll be asked once more.
2Choose how to triage
- Copy to local disk first (recommended): Intake copies the card to your Mac, or to an external SSD you pick, and you start flagging right away while the copy finishes. The card isn't changed. Tick Clear the card and eject it once the copy is verified to have it emptied as soon as the copy checks out.
- Triage directly on the card: nothing is copied. Quicker to start, slower to flip through.
Click Start Triage or press ↩.
3Flag
| K or 1 | Keep |
| X, 2 or ⌫ | Reject |
| U or 0 | Clear the flag |
| ← → | Previous / next |
| Z, Space or click | Look at 100% (Esc to go back) |
| Space | Play / pause a video |
| B | Burst grid on / off |
| F | Show where sharpness was measured, and the faces it found |
| P / V | Photos only / videos only (again for everything) |
| ⌘Z | Undo the last flag |
| ⌘E | Quick Eject |
| ⌘↩ | Finish |
| ? | Show all the keys in the app |
- With Auto-advance on, K and X move straight to the next frame. That's the fastest way through a card.
- Bursts: frames shot within two seconds of each other show as a grid, and K/X work right there. Sharpness bars rank each frame against the sharpest one in that burst. In a burst, Space cycles: first press opens the frame, second goes to 100%, third returns to the grid.
- Face badge: each burst frame shows how many faces it found. Green means every face it could judge has both eyes open; red with a count means that many people blinked. A plain badge means faces were found but none could be judged (profiles, or too small).
5/7means seven people are in the burst and five are facing the camera in this frame. Press F to see the boxes: red for closed eyes, dashed for faces it didn't judge. - Face quality (single view) comes from macOS's built-in Vision framework, not from Intake. Apple describes it as a 0–1 number where faces closer to 1 are “better lit, sharper, and more centrally positioned”; the model behind it isn't published. Intake averages it over the faces in the frame and shows it as 0–100. Apple's guidance is that it ranks shots of the same people against each other, so compare it across the frames of a burst, not between different photos.
- The line above the viewer shows aperture, shutter, ISO, focal length, dimensions, camera and lens, read from the file without decoding it, plus an orange warning when 5% or more of the frame is pure white (or 10% pure black). It wraps to a second line on a narrow window rather than cutting anything off.
- Sweep back through the undecided: the three counters in the toolbar (keepers, rejects, undecided) are also filters. Click one and the arrows and filmstrip walk only items with that flag; click it again for everything. With auto-advance on, flagging an undecided frame takes you straight to the next undecided one.
- Interrupted? Flags are saved as you go. The start screen lists unfinished cards; Resume picks up where you left off.
4Finish
Press ⌘↩. The Finish sheet spells out what will happen before anything does:
- Rejects go to the Trash, never deleted outright, so a mistake can be put back from Finder.
- Keepers go into Photos (optionally an album named for today), into a folder library sorted by date, both, or stay where they are.
- Unflagged photos are left alone, unless you choose to treat them as rejects. That's keeper-only mode: just press K on the good ones.
Afterwards, a receipt lists what moved where.
5Quick Eject
Press ⌘E, click the eject button on the card, or use Quick Eject on the receipt. Intake tells you when it's safe to pull the card. If something else is still using it, Intake says so and offers Force Eject; your photos are safe once Intake has finished with the card. Then format the card in camera.
Common questions
-
Which cameras and files does Intake work with?
Any camera's card. Stills come from the standard DCIM folder: JPEG, HEIF, PNG, TIFF, DNG and the RAW formats from Sony (ARW), Canon (CR2, CR3, CRW), Nikon (NEF, NRW), Fujifilm (RAF), OM System/Olympus (ORF), Panasonic (RW2), Pentax (PEF), Leica (RWL), Sigma (X3F), Hasselblad (3FR), Phase One (IIQ), Samsung (SRW) and GoPro (GPR). Video is found in DCIM (Canon, Nikon, Fujifilm, GoPro, DJI, phones) and in the separate folder trees camcorders use: Sony XAVC S and XDCAM, AVCHD, Panasonic P2 and Canon XF. Clips bring their sidecars along, including GoPro's LRV proxies and THM thumbnails, DJI's SRT telemetry, and Sony's XML, thumbnail and proxy files. AVCHD clips import fine but show a placeholder instead of a preview frame while you triage.
-
Does Intake ever delete my photos?
Only what you reject, and only to the Trash, so it can be put back. The card itself is cleared only if you ask, and only after Intake has checked every copied file against the original. The Finish sheet lists every move before it happens.
-
Can I use it without Photos?
Yes. Choose a folder library in Finish or Settings and keepers are filed into dated folders, for Lightroom, Capture One or plain Finder. You can also use Open Folder… to triage any folder of photos already on your Mac.
-
Why does Intake ask for access to each card?
Apps from the Mac App Store can only read the files you choose. Intake remembers each card after you allow it once. A card formatted in camera counts as a new card, so you'll be asked again.
-
How does the free version work?
You can browse any card at full speed, always. Your first three Finishes are free; after that, a one-time purchase unlocks flagging and Finish. Your flags are saved, so buying picks up exactly where you stopped. Already bought it on another Mac? Use Restore Purchase in Settings.
-
The eject says the card is still in use.
Another app, often Photos, Image Capture or Spotlight, is still reading the card. Wait a moment and try again, or choose Force Eject. Once Intake has finished with the card, forcing it is safe for your photos.
-
What does Intake need to run?
A Mac with macOS 14 Sonoma or later. Apple silicon is recommended, especially for 10-bit video.
Contact
A question not covered here, a bug, or a camera that doesn't work the way you'd expect? Send an email, ideally with your camera model, and I'll get back to you.
Email: support@realpazzo.com